IMR 1400-IR : 3-4 CELL FLUE-GAS ANALYZER (MEASURES CO2)

MEASURES CO2 with NDIR Technology
This latest model does not only measure the most common parameters but also CO2 !!

IMR 1400-IR measuring range: CO2 (NDIR), O2, CO, NO, NO2 (SO2), draft/pressure, soot, Flue-gas and ambient temperature.
- Calculates:Combustion efficiency, heat losses, excess air, CO corrected
- Comes standard with gas-sampling probe, condensation trap, rugged case,battery, printer, CO-bypass, serial interface, memory, 12VDC

Has been designed to measure flue gases:
Measures flue-gases of boilers, burners, engines
Developped to meet the customers need
High quality combustion gas analyzer using the latest sensor technology
Easy to use and it measures all important parameters
Includes all needed features for a complete analysis

Download IMR 1400-IR

STANDARD FEATURES FOR THE IMR 1400-IR:

• Illuminated display with simultaneous display of 8 measured variables.
  
• Languages: D, UK, F, USA, E, TR, etc.
  
• 7 programmed and 5 programmable fuels
  
• Measurement display is switchable between ppm, mg, mg(O2) and mg/kwh
  
• Battery status is shown on the measurement display
  
• Interface RS 232
  
• Printout of all measured and calculated parameters
  
• Electronic controlled soot measurement
  
• Automatic and manual CO overflow shut-off
  
• Automatic zero calibration within 3 minutes. Recalibration within 30 sec.
  
• Integrated self check program for all functions and parameters.
  
• After 1000 operating hours a "Service needed" note appears on the display.
  
• Gas sampling probe, length 10.5" (270mm),NiCrNi, flexible hose 11.5 ft. (3,5m)
  
• Combustion air probe, length 5" (130mm), line 11.5 ft. (3,5m)
  
• Condensation trap with integrated filter
  
• Operating temperature 50°F..104°F (10°C..40°C)
  
• Storing temperature -4°F..122°F (-20°C..50°C)
  
• Power supply 230V/50Hz, 110V/60Hz, 12VDC
  

- Dimensions wxdxh: 16"(425mm) x 7"(185mm) x 11"(290mm)
- Weight: approx. 15lbs. (5.8kg)

IMR 1400-IR: O2, CO, CO2 (P/N: 14296)