SAE-MS: Seismograph : Mini Seis

Mini-Seis adalah definisi yang baik dari sebuah seismograf besar untuk biaya yang terjangkau. Ini sangat ideal untuk semua jenis pemantauan getaran dan ledakan, Alat ini untuk memantau getaran yang terus menerus dalam mode bargraph. Kasar, handal dan sangat mudah digunakan, Mini-Seis menetapkan standar nilai dalam seismograf.

Download

Features:

• Lightweight and easy to use. Includes convenient carrying case.
  
• Economical. Costs much less than comparable seismographs.
  
• Maintenance and calibration costs are also less.
  
• Rugged and shielded against RF interference.
  
• Keypad and display for easy field setup and data review.
  
• External seismic package and microphone interchangeable between units of like sensitivity.
  
• Selectable seismic and acoustic recording range, seismic and acoustic trigger level, sample rate and record duration.
  
• Excellent power management. Rechargeable internal battery. Can use either AC or DC power for long term monitoring.
  
• Wave form (self-trigger and manual-trigger) and continuous bar graph (histogram) modes.
  
• Sophisticated, non-loss data compression results in small record sizes and fast data transfer.
  
• Separate battery backup for memory if power fails.
  
• Works with remote access by any device equipped for serial data transfer including cellular and satelitte whether dial-up or TCP (internet).
  
• Automatic reporting of data after a trigger. The AutoReceive software can handle data obtained via TCP (internet), dial-up or direct connection.
  
• Can store up to 340 blast type records of 6 seconds in duration or 80 days of bar graph depending on memory.
  
• Meets and exceeeds International Society of Explosives Engineers performance standards.
  
• Full featured software package included with functions normally sold separately as "Advanced" by competitors.
  
• One year parts and labor warranty. Extendable to 2 years. (Restrictions apply)

Accessories:
Station Box (shown)
We can provide a fully configured station box ready for use for long term monitoring. The box is vented for air overpressure, has two recessed locks, a PVC pipe for sensor burial, 20 watt solar panel and voltage regulator. Installation is very easy. Instructions are provided.

External Printer
The external printer turns the Mini-Seis into a field printing seismograph for much less cost than a seismograph with a built-in printer. Many problems that arise with printing seismographs involve the printer. Having an external printer means that records can easily be printed without having to worry about the detrimental effects of rain and dust.

Cellular Modem
When used with a station box, a cellular modem provides remote data access from nearly anywhere. Where TCP/IP is available, the access can use any internet connection. As long as the modem supports serial communication, any cellular protocol can be used, i.e. GSM, GPRS, CDMA.

Satellite Modem
If cellular is not an option then satellite may also be used. While satellite costs more than cellular, it is a reliable method for very remote areas.

Solar Panel
A solar panel is included in the cost of a configured station box. However, these can be purchased separately. A variety of outputs are available.